Aviall Product Catalog And Source Book Page 1068 Aircraft Lighting

LAMPS GE LIGHTING LAMPS aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 1068 Neon Glow Indicator Lamps T-3 1 /4" Approx. 13 /32" (10 mm) Diameter Part Circuit Volts Average Fig. No. AC or DC Base Useful Life Footnotes No. B1A (NE-51) 105-125 Miniature bayonet 15,000 hrs. 1 96 B2A (NE-51H) 105-125 Miniature bayonet 25,000 hrs. 2, 3, 4, 5 96 T-4 1 /2 Approx. 9 /16" (14 mm) Diameter Part Circuit Volts Average Fig. No. AC or DC Base Useful Life Footnotes No. B7A (NE-45) 105-125 Candelabra screw 7,500 hrs. 1 97 PAR36 Bulb 114 mm (4 1 /2") Diameter Design Rated Part Primary Design Watts Average No. Application Volts or Amps Lab Life Base 4509 Aircraft landing spotlamp 6 13.0 100 W 25 hrs. Screw terminals 4595 Aircraft navigation 13.0 100 W 300 hrs. Screw terminals Q4509 Aircraft landing 6, 8 13.0 100 W 100 hrs. Screw terminal 4313 Aircraft landing 13.0 250 W 25 hrs. Screw terminals Q4631 Halogen Quartzline , aircraft 13.0 250 W 500 hrs. Screw terminals landing, wing inspection 7, 8 Q4632 Halogen Quartzline aircraft logo 7, 8, 9 13.0 250 W 500 hrs. Screw terminals 4505 Aircraft navigation 28.0 50 W 400 hrs. Screw terminals 4589 Aircraft cockpit flood, 28.0 50 W 400 hrs. Screw terminals C.I.M. flood 4589-1 Aircraft cockpit flood, 28.0 50 W 400 hrs. Slip-on terminals C.I.M. flood 4593 Aircraft in-air refueling 28.0 50 W 400 hrs. Screw terminals 4591 Aircraft landing 28.0 100 W 25 hrs. Screw terminals 4594 Aircraft navigation 28.0 100 W 300 hrs. Screw terminals 4627 Aircraft flood 28.0 100 W 300 hrs. Screw terminals 4626 Aircraft taxiing 28.0 150 W 300 hrs. Screw terminals 4713 Aircraft logo 28.0 150 W 300 hrs. Screw terminals 4587 Aircraft taxing 7 28.0 250 W 25 hrs. Screw terminals 4596 Aircraft landing 7 28.0 250 W 25 hrs. Screw terminals 1 Life to approximately 50% of initial output. Values shown apply to use on AC unless otherwise shown. Life on DC is approximately 60% of AC values when DC current is equal to R.M.S. (Root Mean Square) AC value. When equal DC and R.M.S. AC voltages and equal resistances are utilized, life will be approximately the same. 2 For DC operation of high, brightness lamps, use minimum of 150 circuit volts. Maximum initial breakdown voltage-95V AC, 135V DC in light. 3 High brightness. 4 Dark effect reduced. 5 Values shown apply to use on AC unless otherwise shown. End of life occurs when breakdown voltage increases to line voltage and lamp will no longer start. With equal DC and R.M.S. AC current life will be somewhat lower than the 60% value quoted for standard brightness lamp, and current and wattage will increase over AC values shown. 6 Not for highway use. 7 This lamp is specially designed for a particular purchaser and may not be suitable for other uses because of its exces- sive wattage requirements for the bulb size. Consult the nearest GE Lamp sales office for application information. 8 CAUTION: This sealed beam lamp has an inner halogen-cycle bulb. This pressure-filled inner bulb could shatter if scratched or damaged. If the outer sealed envelope is intact, this will be no problem. If the outer sealed envelope is broken, however, do not operate the lamp. Instead, carefully remove and dispose of the lamp by placing it in a used head lamp carton or other closed container. 9 Lens stippled. T-3 1 /4" (Fig. 96) T-4 1 /2" (Fig. 97)

Previous Page
Next Page