Aviall Product Catalog And Source Book Page 108 Hardware, Hose & Fittings

STRATOFLEX HOSE & FITTINGS aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 108 170 PTFE HIGH PRESSURE HOSE Ordering Information for Standard Items 1. Hose assembly: Straight-to-straight or straight-to-single elbow example: 170001-8 CR-0185 Basic hose assembly number Assembly length in inches. Last digit is eighths of an inch. Size ( 1 /2" O.D. tube size) in 1 /16" See material note below Basic hose assembly part numbers may be modified to add a sleeve or coil by the insertion of a code letter between the basic hose number and the configuration. 170F001-8CR-0185 Basic part number with 2650-13 firesleeve and 10781-4-22CR clamps Double elbow example: 170060 E 0185 C 180 Basic hose assembly number Size ( 1 /2" O.D. tube size) In 1 /16" Size code for double elbow hose assemblies Dash Size -4 -6 -8 -10 -12 -16 SF Code Letter B D E F G H Material: Unless otherwise noted, conforms to applicable specifications. C or CR Non-brazed/welded parts - SAE 30304 (AMS5639) Other materials: titanium, Inconel, etc, available. Brazed/welded parts - SAE 30321 (AM5570 or AMS5645) CL Same as CR except lockwire holes in nut Length measurement: length is measured along hose centerline from end of nipple to end of nipple Note: For additional information on special materials or accessories not shown, or contact Aviall. Note: Unless otherwise noted, dimensions shown herein are nominal and are subject to change without notice. 2. Identification bands: An example of identification bands used when required for hose assemblies confirming TSO-C42, C53a or C75 follows: Twist angle (180 ) See material note below Assembly length in inches. Last digit is eighths of an inch.

Previous Page
Next Page