Aviall Product Catalog And Source Book Page 1133 Aircraft Lighting

LED LIGHTS WHELEN AIRCRAFT LIGHTING aviall ability aviall.com 1133 Model No. Part No. Description LED Color 7090501 01-0770905-01 LED beacon for rotorcraft, 5-hole mounting pattern, MS-connector Aviation red LED Lighting Products Whelen is proud to introduce its family of position lights, anti-collision lights, and ground recognition beacons that utilize LED technology as a light source. The result is a high-quality, long-lasting modern alternative to existing lighting designs. The solid state LED light source has shown conservative lab life results greater than 20,000 hours. Shock and vibration resistant with no fragile filament to burn out or replace. There is no EMI or RFI produced. Lens designs are one-piece construction that is much less susceptible to environmental or chemical breakdown. Low current draw means no inrush current that is inherent with strobes and halogen flashers. Model 70905 Series LED beacons for rotorcraft. FAA-TSO-C96a APPROVED. MEETS FAR 27 AND FAR 29 FOR ANTI-COLLISION LIGHT SYSTEMS USED ON ROTORCRAFT, REF; CLASS I (150 EFFECTIVE CANDELA) OF SAE AS8017A. The Model 70905 Series are self-contained, anti-collision lights for rotorcraft. An external power unit is not required. The durability of LED as a light source will significantly reduce operating costs associated with spare part replacement and premature failure of existing light sources. Available in 28 volts only. Model 7090501 LED beacon. FAA-TSO-C96a APPROVED. Model 7090501 is designed to replace existing beacons with the 5-hole mounting pattern on a 4.656" diameter bolt circle. (Reference Whelen 70285 series). It incorporates an MS3102R10SL-3P connector for input. Weight: 1.40 lbs.; exposed diameter: 3.66"; exposed height: 4.04". Power consumption: 0.45 A @ 28 V DC. Model No. Part No. Description LED Color 7050502 01-0770905-02 LED beacon for rotorcraft Aviation red Model 7090502 LED beacon. FAA-TSO-C96a APPROVED. Model 7090502 is designed to replace existing remote-mounted strobe lights. (Reference Whelen A470A series.) A power supply is no longer required. Weight: 1.20 lbs.; exposed diameter: 3.66"; exposed height: 4.14". Power consumption: 0.45 A @ 28 V DC. Model No. Part No. Description LED Color 7090503 01-0770905-03 LED beacon for rotorcraft, 3 3 /4" diameter mounting pattern Aviation red Model 7090503 LED beacon. FAA-TSO-C96a APPROVED. Model 7090503 is designed to replace existing beacons with the 3 3 /4" diameter mounting pattern. (Reference Whelen HRCFA series, 90081 Series, and the old-style rotating beacons.) It has the same mounting hole pattern. No modification to the aircraft is required. Weight: 1.10 lbs.; exposed diameter: 2.80"; exposed height: 3.10". Power consumption: 0.45 A @ 28 V DC. Model 7090501 Model 7090502 Model 7090503 * Parts without FAA approval may be purchased, however, installation of these parts on U.S. type certified aircraft may require additional approvals. Refer to Whelen Model to Part No. List at the end of this section for complete part numbers. Model No. Part No. Description Connectors 90088( ) 01-0770905-( ) LED ground recognition light Two MS connectors Model 90088 LED ground recognition light. NOT FAA/PMA APPROVED*. MEETS FAR PARTS 23, AND FAR 25 COLOR REQUIREMENTS FOR AVIATION RED AND FAA DESIGN CONFORMITY RTCA/D)160d. The solid state circuitry (no moving parts) makes the oscillating mechanical beacon obsolete. There is no EMI or RFI produced. Reduced current draw results in no inrush current spikes to show up on your strike finder. Crisp on off cycles compared to flashing and mechanical beacons. They are compatible with existing ground recognition light mounting patterns and profiles without altering the aircraft. Contact factory for complete details on available mounting configurations. Weight: 1.80 lbs.; length: 9.87"; exposed height: 2.70". Power consumption: 0.45 A @ 28 V DC.

Previous Page
Next Page