Aviall Product Catalog And Source Book Page 116 Hardware, Hose & Fittings

STRATOFLEX HOSE & FITTINGS aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 116 29724/29524 straight flared fitting (crimp). 37 flare swivel. Mates with AS4395 connection type. Tube Cut Dia. Part Size Hose Max. Factor Min. Nominal No. O.D. Size A B C D E Nominal 29724-4-4CR 0.250 -4 0.4375-20UNJF-3B 1.54 0.51 0.122 0.35 0.56 0.56 29724-6-6CR 0.375 -6 0.5625-18UNJF-3B 1.82 0.61 0.216 0.38 0.69 0.096 29724-8-8CR 0.500 -8 0.750-16UNJF-3B 2.07 0.68 0.306 0.43 0.88 0.158 29724-10-10CR 0.625 -10 0.875-14UNJF-3B 2.33 0.74 0.369 0.51 1.00 0.228 29524-12-12CR 0.750 -12 1.0625-12UNJ-3B 2.49 0.73 0.459 0.57 1.25 0.361 29524-16-16CR 1.000 -16 1.3125-12UNJ-3B 2.67 0.82 0.684 0.60 1.50 0.575 Tube Size Hose Part No. O.D. Size Nominal Maximum 1 Min. @ 70 F Min. @ 400 F lbs./in. 171-4K 0.250 -4 0.222 0.490 3000 16,000 12,000 1.50 0.011 171-6K 0.375 -6 0.308 0.590* 3000 14,000 10,500 2.50 0.016 171-8K 0.500 -8 0.401 0.725* 3000 14,000 10,500 2.88 0.024* 171-10K 0.625 -10 0.495 0.830* 3000 12,000 9000 3.25 0.032* 171-12K 0.750 -12 0.617 1.095* 3000 12,000 9000 4.00 0.062* 171-16K 1.000 -16 0.895 1.380 3000 12,000 9000 5.00 TBD 1 May exceed AS115, et. al. 2 Hose has an abrasion sleeve which has a lower temp. spec than the underlying hose. Note: See temperature limit "K" style 171 PTFE HOSE & FITTINGS 171K PTFE hose. MEETS OR EXCEEDS THE REQUIREMENTS OF AS1339 (FORMERLY MIL-H-38360) except maximum sustained temperature. See Information Bulletin IB-1030 for TSO approvals. Tube construc- tion of extruded conductive aerospace polytetrafluoroethylene. Reinforcement: high density braid of small diameter corrosion resistant steel wire. Conductivity conforms to AS1339 (MIL-H-38360). Cover: integral braided blue polyester, abrasion resistant. Application: medium temperature and high pressure aircraft and missile hydraulic systems requiring added abrasion protection. Proof pressure: hydrostatic pressure test at twice the rated working pressure. Temperature range: -65 to +275 F/300 F (-54 to +135 C/149 C) maximum limit for abrasion cover 2 . Features include: same small bend radii as basic 171 psi hose and abrasion resistance. 29726/29526 45 elbow flared fitting (crimp). 37 flare swivel. Mates with AS4395 connection type. Tube Cut Dia. Part Size Hose Max. Factor Min. Nominal No. O.D. Size A B C D E Nominal 29726-4-4CR 0.250 -4 0.4375-20UNJF-3B 1.82 0.111 0.115 0.31 0.56 0.062 29726-6-6CR 0.375 -6 0.5625-18UNJF-3B 2.22 1.36 0.204 0.40 0.69 0.109 29726-8-8CR 0.500 -8 0.750-16UNJF-3B 2.48 1.50 0.289 0.46 0.88 0.191 29726-10-10CR 0.625 -10 0.875-14UNJF-3B 2.98 1.87 0.349 0.54 1.00 0.283 29526-12-12CR 0.750 -12 1.0625-12UNJ-3B 2.73 1.51 0.434 0.69 1.25 0.459 29526-16-16CR 1.000 -16 1.3125-12UNJ-3B 3.02 1.74 0.646 0.79 1.50 0.700 Note: MS33656 canceled and replaced by AS4395.

Previous Page
Next Page