Aviall Product Catalog And Source Book Page 1211 Avionics & Instruments

ANTENNAS DAYTON-GRANGER ANTENNAS aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 1211 * Has a BNC connector and a notch cut in the base. This antenna is designed specifically to be mounted on the underside of a Dornier 328 aircrafts fuselage. ** Not TSO'd. VF10-347- ( ) VHF communications antenna. FAA-TSO-C37b, C38b APPROVED. The VF10-347-( ) series SPI antennas are low profile, vertically polarized VHF communications antennas which operate over the frequency range of 116 to 150 MHz. The antenna is constructed of cast aluminum for extra strength and longer durability during flight. This antenna has a much higher MTBF (Mean Time Between Failure) than fiberglass antennas presently available on the market. Aluminum/fiberglass construction 50 ohms impedance White polyurethane finish Omnidirectional radiation pattern 100 psi side load Vertical polarization 600 knot speed rating 40 watt power Part No. Connector Direct Replacement for Frequency VSWR Weight Height Vibration Temperature VF10-347-1 BNC Chelton 16.21B fiberglass 116-150 MHz 2.5:1 @ 1.5 lbs. 8.3" 3 g -62 C to 71 C 116-150 MHz (0.67 kg) (210 mm) VF10-347-2 TNC Chelton 16.21T fiberglass 116-150 MHz 2.5:1 @ 1.5 lbs. 8.3" 3 g -62 C to 71 C 116-150 MHz (0.67 kg) (210 mm) VF10-347-3** BNC HR Smith 10-118-1 116-150 MHz 2.5:1 @ 1.5 lbs. 8.3" 3 g -62 C to 71 C 116-150 MHz (0.67 kg) (210 mm) VF10-347-4** TNC HR Smith 10-118-2 116-150 MHz 2.5:1 @ 1.5 lbs. 8.3" 3 g -62 C to 71 C 116-150 MHz (0.67 kg) (210 mm) VF10-347-5* BNC 116-150 MHz 2.5:1 @ 1.5 lbs. 8.3" 3 g -62 C to 71 C 116-150 MHz (0.67 kg) (210 mm) VF10-347

Previous Page
Next Page