Aviall Product Catalog And Source Book Page 1227 Avionics & Instruments

ADHESIVES & ANTI-STATIC AGENT DAYTON-GRANGER ANTENNAS aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 1227 North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 Adhesives for Mounting Retainers It is recommended that all retainers be mechanically riveted or screwed to the aircraft structure and that a good quality adhesive (DG part no. 15348) be used to seal the area underneath the retainer. In cases where rivets or screws are not possible, such as honeycomb surfaces, our conductive silver loaded epoxy (part no. 16307) should be used. Elastomeric. This is a two part epoxy used as a seal between the retainer and the skin of the aircraft to keep out moisture, dust, and other elements that could cause corrosion problems. This must be used with positive mechanical fastening devices such as rivets or screws. One epoxy kit contains enough material to seal approximately eight retainers. Part No. Description 15348 Elastomeric Anti-static spray agent. Dayton-Granger's anti-static spray agent is a transparent, high resistive, temporary coating that can be sprayed on insulating surfaces such as radomes, windshields, fiberglass wing tips, and antennas to prevent streaming noise in precipitation static conditions. The film provides a high resistance bleed path for the insulating surfaces. The spray coating usually remains effective for 10 flights at which time the windshield and/or structure should be resprayed. Each bottle contains 4 ounces which is enough anti-static agent for approximately 40 applications on a standard windshield. This spray agent can also be used to isolate streaming noise. The suspected area can be treated with the temporary agent to see if the problem disappears. The bottle is complete with a pump-type spray nozzle. Part No. Description Weight 16895 Anti-static agent 4 oz. Conductive. This adhesive is a special two part silver-loaded conductive epoxy. The primary purpose of this conductive adhesive is to attach retainers where rivets and other fastening devices cannot be used. (such as when retainers are mounted on honeycomb surfaces or on tip tanks). One epoxy kit contains enough material to mount approximately eight retainers. Part No. Description 16307 Conductive

Previous Page
Next Page