Aviall Product Catalog And Source Book Page 1287 Electrical & Batteries

BATTERY CHARGERS & ANALYZERS aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 1287 AVIALL BATTERY SHOP Avix minicharger battery charger/analyzer. Three charge modes: constant current; float and peak; 0 to 2 amps. The minicharger is an instrument designed to charge, trickle charge and analyze (discharge) nickel cadmium, sealed lead-acid and other types of rechargeable batteries. With its multiple modes of operation of constant current, constant voltage and peak charge and analysis and deep cycle discharge modes, the minicharger can satisfy the requirements of most small rechargeable battery systems. Two large digital meter permit the simultaneous monitoring of voltage and current, while six indicator lights inform of the status of the operation. An external optional electronic digital timer (Timer 24), complements the minicharger for applications requiring a time limit. The minicharger is basically a precision voltage controlled current source/sink, with programmable current and voltage endpoints, capable of providing various charge and discharge modes. Two discharge modes: analysis and deep cycle; 0 to 10 amps. Fully protected. In the constant current charge mode, the current is set by the current selector. Its setting is independent of the battery voltage, from 0 volts (short circuit) up to 40 V. The charge current is also independent of the line voltage, within the specified line voltage limits. In the constant voltage charge mode, the current starts constant (as per the CC mode) and remains constant until the battery voltage is within a fraction of the selected value (0.5 V approximately). At this point, the current is automatically reduced and regulated to maintain the programmed battery voltage. In the charge and peak stop charge mode, the current starts constant (as per the CC mode) and it is terminated automatically when the battery reaches the programmed peak voltage. Part No. Description BS1094M Avix minicharger battery charger/analyzer Beta D-50. Services any voltage or type of battery Constant current discharge adjustable from 0 to 50 amperes Selectable low voltage cutoff Selectable discharge time from 1 to 999 minutes with digital readout Audible alarm at end of test Meters and timer lock-in their reading for amp-hr capacity Accept and fail lights for simplified go/no-go test Operates on either 115 or 230 V AC Part No. Description ALPHAC25BETAD50 Discharge capacity test unit Alpha C-25. Isolated charge - one or two batteries Charges all 12 and 24 volt batteries, and 1 to 22 cell NiCads Current adjustable from 0 to 25 amps True constant current (CI) for NiCad batteries, or constant potential (CP) for lead acid batteries Digital ammeter and voltmeter read charge current and voltage for either battery Selectable charge time from 1 to 999 minutes with digital readout Operates on either 115 or 230 V AC Part No. Description ALPHAC20 Charger

Previous Page
Next Page