Aviall Product Catalog And Source Book Page 135 Hardware, Hose & Fittings

STRATOFLEX HOSE & FITTINGS aviall.com aviall ability 135 191 PTFE HOSE & FITTINGS 29524/29954 straight flared fitting (crimp). 37 flare swivel. Mates with AS4395 (MS33656) connection ends. Tube Cut Drill Size Hose Max. Factor Min. D Part No. O.D. Size A B C Nominal E Nominal 29524-4-4CR 0.250 -4 0.4375-20UNJF-3B 1.51 0.51 0.141 0.35 0.56 0.068 29524-6-6CR 0.375 -6 0.5625-18UNJF-3B 1.80 0.58 0.250 0.38 0.69 0.102 29524-8-8CR 0.500 -8 0.750-16UNJF-3B 2.04 0.66 0.360 0.43 0.88 0.173 29954-10-10CR 0.625 -10 0.875-14UNJF-3B 1.80 0.74 0.450 0.51 1.00 0.264 29524-12-12CR 0.750 -12 1.0625-12UNJ-3B 1.92 0.73 0.568 0.57 1.25 0.380 191 PTFE hose. MEETS OR EXCEEDS THE REQUIREMENTS OF AS1339 (FORMERLY MIL-H-38360) except temperature. See Information Bulletin 1B-1030 for TSO approvals. Tube construction of extruded conductive polytetrafluoroethylene. Reinforcement: High density braid of corrosion resistant steel wire. Conductivity con- forms to AS1339. Barrier: polytetraflouroethylene for corrosion resistance. Cover: integral braided Cordura for abrasion resistance. Application: high pressure aircraft hydraulic systems (for landing gear). Proof pres- sure: hydrostatic pressure test at twice the rated working pressure. Temperature range: -65 F to +275 F (Brief excursions to 300 F). Features include: up to four times more abrasion resistant than comparable polyester-covered products; new PTFE corrosion/contamination barrier provides protection in harsh environ- ments; lightweight construction; non-aging PTFE. Tube Size Hose Part No. O.D. Size Minimum Maximum Min. @ 70 F Min. @ 275 F lbs./in. 191-4 0.250 -4 0.212 0.515 3000 16,000 12,000 1.50 0.012 191-6 0.375 -6 0.298 0.610 3000 14,000 10,500 2.50 0.016 191-8 0.500 -8 0.391 0.740 3000 14,000 10,500 2.88 0.024 191-10 0.625 -10 0.485 0.870 3000 12,000 9,000 3.25 0.030 191-12 0.750 -12 0.602 1.085 3000 12,000 9,000 4.00 0.062 29526/29956 45 elbow flared fitting (crimp). 37 flare swivel. Mates with AS4395 (MS33656) connection type. Tube Cut Min. Size Hose Max. Factor Thru D Part No. O.D. Size A B C Nominal E Nominal 29526-4-4CR 0.250 -4 0.4375-20UNJF-3B 1.79 1.11 0.115 0.31 0.56 0.076 29526-6-6CR 0.375 -6 0.5625-18UNJF-3B 2.22 1.35 0.204 0.40 0.69 0.115 29526-8-8CR 0.500 -8 0.750-16UNJF-3B 2.49 1.50 0.389 0.46 0.88 0.206 29956-10-10CR 0.625 -10 0.875-14UNJF-3B 2.96 1.86 0.349 0.54 1.00 0.319 29526-12-12CR 0.750 -12 1.0625-12UNJ-3B 2.73 1.51 0.434 0.69 1.25 0.449 29528/29958 90 elbow flared fitting (crimp). 37 flare swivel. Mates with AS4395 (MS33656) connection ends. Tube Cut Min. Size Hose Max. Factor Thru D Part No. O.D. Size A B C Nominal E Nominal 29528-4-4CR 0.250 -4 0.4375-20UNJF-3B 1.55 0.76 0.109 0.66 0.56 0.074 29528-6-6CR 0.375 -6 0.5625-18UNJF-3B 1.86 0.88 0.188 0.86 0.69 0.115 29528-8-8CR 0.500 -8 0.750-16UNJF-3B 2.14 0.94 0.313 0.94 0.88 0.206 29958-10-10-CR 0.625 -10 0.875-14UNJF-3B 2.47 1.20 0.375 1.14 1.00 0.319 29528-12-12CR 0.750 -12 1.0625-12UNJ-3B 2.89 1.31 0.469 1.47 1.25 0.478

Previous Page
Next Page