Aviall Product Catalog And Source Book Page 177 Hardware, Hose & Fittings

SST BLIND RIVET SYSTEM CHERRY SST FASTENERS aviall.com aviall ability 177 Material 3 Finish Sleeve Stem Lock Collar Expander Sleeve Stem Lock Collar Expander 5056 Aluminum A-286 CRES Chemical film Passivated per None QQ-A-430 AMS 5731 AMS 5731 or per MIL-C-5541 QQ-P-35 300 Series CRES plain color per ASTM-A-493 Grip Limits -4 Dia. -5 Dia. -6 Dia. Part Grip Dash No. Min. Max. No. No. -02 6 0.125 CR6222-4-02 CR6222-5-02 CR6222-6-02 -03 0.126 0.187 CR6222-4-03 CR6222-5-03 CR6222-6-03 -04 0.188 0.250 CR6222-4-04 CR6222-5-04 CR6222-6-04 -05 0.251 0.312 CR6222-4-05 CR6222-5-05 CR6222-6-05 -06 0.313 0.375 CR6222-4-06 CR6222-5-06 CR6222-6-06 -07 0.376 0.437 CR6222-4-07 CR6222-5-07 CR6222-6-07 -08 0.438 0.500 CR6222-4-08 CR6222-5-08 CR6222-6-08 -09 0.501 0.562 CR6222-4-09 CR6222-5-09 CR6222-6-09 -10 0.563 0.625 CR6222-4-10 CR6222-5-10 CR6222-6-10 CR6222 SST Rivet - 100 Flush Nominal Diameter Notes: 1 Head markings and lock collar visible after installation. Head markings depressed 0.010 max., orientation optional 2 Minimum blind side clearance for satisfactory installation 3 Material designation refers to chemical composition only 4 Theoretical diameter "A" max. and head height "B" max. are for engineering reference only 5 Expander may be 1 or 2 piece design 6 Minimum grip for -4 diameter is 0.063, -5 diameter is 0.065, and -6 diameter is 0.080 To build your part number, start with base part no. CR6222, add diameter dash number to specify diameter, then add grip dash number to specify grip length (e.g., CR6222-4-2). -4 Dia. -5 Dia. -6 Dia. L 0.015 0.015 0.015 0.213 0.220 0.235 0.275 0.282 0.297 0.338 0.345 0.360 0.400 0.407 0.422 0.463 0.470 0.485 0.525 0.532 0.547 0.588 0.595 0.610 0.650 0.657 0.672 - 0.735

Previous Page
Next Page