Aviall Product Catalog And Source Book Page 180 Hardware, Hose & Fittings

SST BLIND RIVET SYSTEM CHERRY SST FASTENERS aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 180 Diameter A 4 Theor A' B 4 D Z BK 2 V W Recommended Dash No. Max. Actual Max. 0.002 Ref Min. 0.0015 0.0001 Hole Limits -4 0.197 0.175 0.030 0.127 0.87 0.355 0.0125 0.1627 0.129 - 0.132 -5 0.248 0.226 0.038 0.158 0.94 0.370 0.0170 0.2027 0.160 - 0.164 -6 0.304 0.283 0.048 0.190 0.94 0.415 0.0230 0.2440 0.192 - 0.196 Material 3 Finish Sleeve Stem Lock Collar Expander Sleeve Stem Lock Collar Expander 5056 Aluminum A-286 CRES Chemical film Passivated per None QQ-A-430 AMS 5731 AMS 5731 or per MIL-C-5541 QQ-P-35 300 Series CRES plain color per ASTM-A-493 Grip Limits -4 Dia. -5 Dia. -6 Dia. Part Grip Dash No. Min. Max. No. No. -02 6 0.125 CR6224-4-02 CR6224-5-02 CR6224-6-02 -03 0.126 0.187 CR6224-4-03 CR6224-5-03 CR6224-6-03 -04 0.188 0.250 CR6224-4-04 CR6224-5-04 CR6224-6-04 -05 0.251 0.312 CR6224-4-05 CR6224-5-05 CR6224-6-05 -06 0.313 0.375 CR6224-4-06 CR6224-5-06 CR6224-6-06 -07 0.376 0.437 CR6224-4-07 CR6224-5-07 CR6224-6-07 -08 0.438 0.500 CR6224-4-08 CR6224-5-08 CR6224-6-08 -09 0.501 0.562 CR6224-4-09 CR6224-5-09 CR6224-6-09 -10 0.563 0.625 CR6224-4-10 CR6224-5-10 CR6224-6-10 CR6224 SST Rivet - 100 NAS1097 - Flush Head/Nominal Diameter Notes: 1 Head markings and lock collar visible after installation. Head markings depressed 0.010 max., orientation optional 2 Minimum blind side clearance for satisfactory installation 3 Material designation refers to chemical composition only 4 Theoretical diameter "A" max. and head height "B" max. are for engineering reference only 5 Expander may be 1 or 2 piece design 6 Minimum grip for -4 diameter is 0.063, -5 diameter is 0.065, and -6 diameter is 0.080 To build your part number, start with base part no. CR6224, add diameter dash number to specify diameter, then add grip dash number to specify grip length (e.g., CR6224-4-2).

Previous Page
Next Page