Aviall Product Catalog And Source Book Page 182 Hardware, Hose & Fittings

CHERRY SPR RIVETS CHERRY SPR RIVETS aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 182 CR1122 Cherry 3 /32" Self Plugging, Locked Spindle Blind Rivets MEETS AND EXCEEDS STRENGTH REQUIREMENTS OF MIL-N-25027 FOR TORQUE OUT AND PUSH-OUT OF NUT PLATES. Features include: stem breaks off flush with top of rivet head. It is self-plugging, which eliminates the need to putty hollow rivets. Available in 100 flush head, nominal 3 /32" diameter, in grip -3. Aluminum sleeve pro- vides rivet to aluminum structure material compatibility. Developed to replace solid and pull-through rivets in non-structural applications. Labor-saving advantage over solidsonly one person needed in install instead of two. SPR installation in much quieter than solid rivets and results in less operator fatigue. Higher strength than pull through rivets. Magnetic permeability is less than 1.05 (Air=1.0) for a field strength H=200 oersteds using a magnetic permeability indicator per MIL-I-7214. Uses single action CherryMAX tools. Part No. Description CR1122( )-3( )* Cherry 3 /32" SPR rivets * See part number example below 1 Stem break off location measured to the highest point on the fracture surface with a 0.050" diameter stylus 2 Blind side clearance for satisfactory installation 3 All dimensions are in inches A' D Recommended Shear Tensile Stem Diameter A Actual B C 0.003 Hole Size Strength Strength Retention Dash No. 0.004 Min. (Ref.) Max. -0.001 Min. Max. (lbs.) Min. (lbs.) Min. (lbs.) Min -3 0.179 0.151 0.036 0.010 0.094 0.098 0.101 105 80 40 National Stock No. Textron Part No. NSN 5320-01-459-8511 CR1122-3-2 NSN 5320-01-459-8512 CR1122-3-3 NSN 5320-01-459-8514 CR1122-3-4 Base Material Finish Lubricant Part No. Sleeve Stem Sleeve Stem CR1122 2017 aluminum A286 per AMS5731 Chemical film Passivated per As required for As required for alloy per QQ-A-430 or stainless steel per MIL-C-5541 QQ-P-35 performance performance per ASTM A-493 (gold color) CR1122FA 2017 aluminum A286 per AMS5731 Chemical film Passivated per As required for Kalgard FA per alloy per QQ-A-430 or stainless steel per MIL-C-5541 QQ-P-35 performance SAE AS5272 per ASTM A-493 (gold color) Grip Grip Range -3 Dia. Dash L K BK 2 Part Part No. Min. Max. Max. Max. Ref No. No. -02 0.080 0.125 0.203 0.338 0.275 CR1122-3-02 CR1122FA-3-02 -03 0.126 0.187 0.265 0.462 0.336 CR1122-3-03 CR1122FA-3-03 -04 0.188 0.250 0.328 0.586 0.398 CR1122-3-04 CR1122FA-3-04 Part Number Example: CR1122 FA -3 -04 Grip dash number (max. grip in 1 /16" increments) Diameter dash number (nominal diameter in 1 /32" increments) Finish code (if applicable) Base part number (materials, head style, series)

Previous Page
Next Page