Aviall Product Catalog And Source Book Page 189 Hardware, Hose & Fittings

CHERRYMAX RIVETS CHERRY RIVETS aviall.com aviall ability 189 Base NAS Material 5 Finish Part No. 523 Code Sleeve Stem Lock Collar Sleeve Stem Lock Collar CR3212 ARM 5056 8740 A-286 Chemical film Cadmium plated Passivated Aluminum alloy Alloy steel CRES per MIL-C-5541 per QQ-P-416 QQ-A-430 AMS 6322 AMS 5731 Plain color Type II CL. 2 CR3222 - 5056 15-7 PH A-286 Chemical film Cadmium plated Passivated Aluminum alloy CRES per MIL-C-5541 per QQ-P-416 QQ-A-430 AMS 5657 AMS 5731 Plain color Type I CL. 2 CR3522 ATL Monel 15-7 PH A-286 None Passivated QQ-N-281 CRES AMS 5657 AMS 5731 CR3522P - Monel 15-7 PH A-286 Aluminum coat None Passivated QQ-N-281 CRES Cherry AMS 5657 AMS 5731 Spec. C-123 Grip Limits 1 /16" -4 ( 1 /8") Diameter -5 ( 5 /32") Diameter -6 ( 3 /16") Diameter -8 ( 1 /4") Diameter Dash +0.000 K Min. Max. No. L -0.030 Max. No. L -0.030 Max. No. L -0.030 Max. No. L-0.030 Max. 2 0.125 -02 0.224 0.45 -02 0.230 0.47 -02 0.262 0.51 - - 0.126 0.187 -03 0.287 0.51 -03 0.293 0.53 -03 0.325 0.57 -03 0.378 0.65 0.188 0.250 -04 0.349 0.57 -04 0.355 0.59 -04 0.387 0.64 -04 0.440 0.72 0.251 0.312 -05 0.412 0.63 -05 0.418 0.65 -05 0.450 0.70 -05 0.503 0.78 0.313 0.375 -06 0.474 0.70 -06 0.480 0.72 -06 0.512 0.76 -06 0.565 0.84 0.376 0.437 -07 0.537 0.76 -07 0.543 0.77 -07 0.575 0.82 -07 0.628 0.90 0.438 0.500 -08 0.599 0.82 -08 0.605 0.84 -08 0.637 0.88 -08 0.690 0.97 0.501 0.562 -09 0.662 0.88 -09 0.668 0.90 -09 0.700 0.95 -09 0.753 1.03 0.563 0.625 - - - -10 0.730 0.96 -10 0.762 1.01 -10 0.815 1.09 0.626 0.687 - - - -11 0.793 1.02 -11 0.825 1.07 -11 0.878 1.15 0.688 0.750 - - - - - - -12 0.887 1.13 -12 0.940 1.22 0.751 0.812 - - - - - - -13 1.003 1.28 0.813 0.875 - - - - - - -14 1.065 1.34 100 Flush Head/Nominal Diameter HEAD MARKINGS VISIBLE AFTER INSTALLATION D C Diameter +0.003 A 1 B BK Z Dash No. -0.001 0.004 (Ref.) Min. (Ref.) Aluminum Monel Hole Limits -4 0.126 0.225 0.041 0.355 0.87 0.002 - 0.010 0.005 - 0.015 0.129 - 0.132 -5 0.157 0.286 0.054 0.370 0.94 0.002 - 0.012 0.005 - 0.015 0.160 - 0.164 -6 0.189 0.353 0.069 0.415 0.94 0.002 - 0.012 0.005 - 0.015 0.192 - 0.196 -8 0.253 0.476 0.095 0.485 0.97 0.002 - 0.016 0.005 - 0.015 0.256 - 0.261 Notes: 1 Head diameter are to theoretical projection 2 Minimum grip for: -4 diameter = 0.063 Minimum grip for: -5 diameter = 0.065 Minimum grip for: -6 diameter = 0.080 3 Rivets with grips greater than their diameter are not required to meet expansion requirements of procurement specifications 4 Do not clean or degrease prior to installation - lubricant must not be removed 5 Chemical composition only 6 Gold colored driving anvil. Identifies nominal rivets

Previous Page
Next Page