Aviall Product Catalog And Source Book Page 192 Hardware, Hose & Fittings

CHERRYMAX RIVETS CHERRY RIVETS aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 192 CHERRY RIVETS Base NAS Material 5 Finish Part No. 523 Code Sleeve Stem Lock Collar Sleeve Stem Lock Collar CR3242 ARD 5056 8740 A-286 Chemical film Cadmium plated Passivated Aluminum alloy Alloy steel CRES per MIL-C-5541 per QQ-P-416 QQ-A-430 AMS 6322 AMS 5731 Plain color Type II CL. 2 CR3252 ARO 5056 15-7 PH A-286 Chemical film Cadmium plated Passivated Aluminum alloy CRES per MIL-C-5541 per QQ-P-416 QQ-A-430 AMS 5657 AMS 5731 Plain color Type I CL. 2 CR3552 ARF Monel 15-7 PH A-286 None Passivated QQ-N-281 CRES AMS 5657 AMS 5731 CR3552P - Monel 15-7 PH A-286 Aluminum coat None Passivated QQ-N-281 CRES Cherry AMS 5657 AMS 5731 Spec. C-123 CR3852 - INCO 600 INCO X-750 A-286 None Passivated AMS 5687 AMS 5698 CRES AMS 5731 Grip Limits 1 /16" -4 ( 1 /8") Diameter -5 ( 5 /32") Diameter -6 ( 3 /16") Diameter -8 ( 1 /4") Diameter Dash +0.000 K Min. Max. No. L -0.030 Max. No. L -0.030 Max. No. L -0.030 Max. No. L -0.030 Max. 0.045 0.062 -01 0.200 0.45 - - - 2 0.125 -02 0.238 0.45 -02 0.266 0.47 -02 0.265 0.48 - - 0.126 0.187 -03 0.301 0.52 -03 0.309 0.53 -03 0.328 0.55 -03 0.375 0.64 0.188 0.250 -04 0.363 0.58 -04 0.371 0.60 -04 0.390 0.62 -04 0.437 0.70 0.251 0.312 -05 0.426 0.65 -05 0.434 0.66 -05 .453 0.68 -05 0.500 0.77 0.313 0.375 -06 0.488 0.71 -06 0.496 0.72 -06 0.515 0.74 -06 0.562 0.83 0.376 0.437 -07 0.551 0.78 -07 0.559 0.79 -07 0.578 0.82 -07 0.625 0.89 0.438 0.500 -08 0.613 0.84 -08 0.621 0.85 -08 0.640 0.89 -08 0.687 0.95 0.501 0.562 -09 0.676 0.90 -09 0.684 0.91 -09 0.703 0.95 -09 0.750 1.02 0.563 0.625 - - - -10 0.746 0.98 -10 0.765 1.01 -10 0.812 1.08 0.626 0.687 - - - -11 0.809 1.04 -11 0.828 1.07 -11 0.875 1.14 0.688 0.750 - - - -12 0.871 1.10 -12 0.890 1.14 -12 0.937 1.20 0.751 0.812 - - - - - - -13 0.953 1.20 -13 1.000 1.27 0.813 0.875 - - - - - - -14 1.062 1.60 100 Flush Head/Oversize Diameter Notes: 1 Head diameters are to theoretical projection. 2 Minimum grip for: -4 diameter = 0.063 Minimum grip for: -5 diameter = 0.063 Minimum grip for: -6 diameter = 0.073 3 Rivets with grips greater than their diameter are not required to meet expansion requirements of procurement specifications 4 Do not clean or degrease prior to installation - lubricant must not be removed 5 Chemical composition only 6 Silver colored driving anvil. Identifies oversize rivets D C Diameter +0.003 A 1 B BK Z Dash No. -0.001 0.004 (Ref.) Min (Ref.) Aluminum Monel Hole Limits -4 0.140 0.225 0.035 0.390 0.87 0.002 - 0.010 0.005 - 0.015 0.143 - 0.146 -5 0.173 0.286 0.047 0.395 0.94 0.002 - 0.012 0.005 - 0.015 0.176 - 0.180 -6 0.201 0.353 0.063 0.410 0.94 0.002 - 0.012 0.005 - 0.015 0.205 - 0.209 -8 0.267 0.476 0.086 0.490 0.96 0.002 - 0.016 0.005 - 0.015 0.271 - 0.275 HEAD MARKINGS VISIBLE AFTER INSTALLATION

Previous Page
Next Page