Aviall Product Catalog And Source Book Page 2188 Paint, Chemicals & Consumables

MAINTENANCE CHEMICALS aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 2188 748 non-corrosive silicone sealant. UL LISTED 94HB; MEETS MIL-A-46146B. Good general purpose bonding and sealing where low odor and noncorrosive properties are required, such as electronics and servo motors, -65 to 300 F continuous, intermittent to 350 F. Part No. Description Color Size DC748-30Z 748 non-corrosive silicone sealant White 3 oz. RTV748-30ZWHI 748 non-corrosive silicone sealant White 3 oz. 832 multi-surface adhesive sealant. UL LISTED 94HB. Non-corrosive, one-part ready to use general purpose sealant, low odor, superior adhesion to most metals, glass and plastic, -67 F to 300 F with intermittent to 350 F, in white, black and gray, avoid Skydrol exposure. Part No. Description Color Size RTV832-10-10Z 832 multi-surface adhesive sealant Gray 10.1 oz. 3110 RTV silicone rubber. White, low viscosity, two-part, with 2 types of curing agents to vary cure speed, mixed 10:1, good leveling compound around engines and struts, used with 1201 primer for best adhesion. Part No. Description Color Size DC3110-1LB 3110 RTV silicone rubber White 1 lb. 3112 RTV silicone rubber. White, two-part, with 4 types of curing agents to vary cure speed, mixed 10:1. Part No. Description Color Size DC3112-1LB 3112 RTV silicone rubber White 1 lb. 3120 RTV silicone rubber. BMS 10-102. Red, medium viscosity, two part, cures to high strength, high durometer, can be used as a sprayable insulation top coat. Part No. Description Color Size DC3120-1LB 3120 Silicone rubber Red 1 lb. Catalysts for 3110, 3112, and 3120 RTV silicone rubber. Catalysts can be added to the various base silicone rubber materials to vary the cure speed. All catalysts should be used at room temperature for any thickness or in confined spaces. Part No. Description Color Consistency Demold Time* FCATALTYST F catalyst - fast rate Light tan Paste 25 minutes - 2 hours SCATALTYST S catalyst - standard rate Light blue Paste 5 - 12 hours 1CATALTYST 1 catalyst - standard rate, Light blue Paste 5 - 12 hours no corrosion inhibitor 4CATALTYST 4 catalyst - fast rate, 200:1 ratio, Clear straw Liquid 10 minutes - 2 1 /2 hours no corrosion inhibitor * Demold time ranges from 25 minutes to 12 hours depending on which base is used. DOW CORNING CHEMICALS

Previous Page
Next Page