Aviall Product Catalog And Source Book Page 2277 Paint, Chemicals & Consumables

AEROSPACE COATINGS SHERWIN WILLIAMS PAINT aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 2277 Conventional Primers Primers Sherwin-Williams Aerospace Coatings offers a full line of primers in both conventional and high solids technology. These primers are specifically formulated to complete the Jet Glo , Acry Glo and new JetFlex coatings systems. Conventional exterior primers Wash primer - promotes adhesion to clean, deoxidized surfaces Corrosion primer - applied over wash primer, provides superior corrosion resistance Sanding surfacers - for smoothing imperfections in metal substrates Non-sanding surfacer - provides excellent seal coat for topcoat High solids exterior primers Wash primer - a specialty coating that promotes adhesion to clean, deoxidized surfaces Corrosion primer - applied over wash primer, provides superior corrosion resistance with low VOCs Sanding surfacers - low VOC primer for smoothing imperfections in metal substrates JetFlex interior primers Polyurethane primer - promotes adhesion over plastic substrates Water-reducible spray fill - fills and hides profile and surface imperfections on foam plastics, metal and wood Wash coat primer. This primer is an aluminum pre-treatment. It should NOT be used over a conversion coating like Alodine. A resin component mixture will redisperse pigment. Although ready to spray in ideal conditions, mixed primer may be reduced 25% in less than ideal conditions. Primer to hardener mix ratio: 1:1. Part No. Description Quantity Comments CM0484684 Wash coat primer Gallon CM0120789 Hardener/adduct Gallon CM0110701 Thinner Gallon, 5 gallons, 55 gallons Corrosion primer. Corrosion, chemical, and impact resistant epoxy primer. This chromated, non-sanding green primer is for use on aluminum, steel and magnesium. Primer to hardener mix ratio: 1:1. Part No. Description Quantity Comments CM0483660 Corrosion primer Gallon Overall corrosion preventive CM0120888 Hardener/adduct Gallon CM0702901 Thinner Gallon Isopropyl alcohol CM0110588 Thinner Gallon Slower dry time Spot primer. Chromated, epoxy quick dry, green spot primer for repairs. Must be re-coated in 2 to 4 hours. Not intended for use as an all-over primer. Primer to hardener mix ratio: 1:1. Part No. Description Quantity Comments CM0483675 Spot primer Gallon Spot repair only; re-coat in 2-4 hrs. CM0120675 Hardener/adduct Gallon CM0702901 Thinner Gallon Isopropyl alcohol CM0110588 Thinner Gallon Slower dry time Military specifications primer. MIL-P-23377F APPROVED. Primer to hardener mix ratio: 1:1. Part No. Description Quantity Comments CM0724400 Military specifications primer Gallon Overall corrosion preventive CM0724114 Hardener/adduct Gallon CM0702901 Thinner Gallon Fast dry time CM0110588 Thinner Gallon Slower dry time Note: For mixing instructions and ratios and other specification contact Aviall or Sherwin Williams or go to sherwin-williams.com

Previous Page
Next Page