Aviall Product Catalog And Source Book Page 2278 Paint, Chemicals & Consumables

AEROSPACE COATINGS SHERWIN WILLIAMS PAINT aviall ability aviall.com 2278 Primers (cont'd) Off-white epoxy sanding surfacer. Features include a forgiving, easy to sand surface that allows for an overnight recoat. Excellent adhesion to aluminum and magnesium surfaces. Primer to hardener mix ratio: 1:1. Gray, non-sanding seal coat. Typically used over an epoxy surfacer or corrosion primer. Off-white epoxy non-chromated sanding surfacer. For high-build spot filling over corrosion primer. Part No. Description Quantity Comments CM0560563 Off-white epoxy sanding surfacer Gallon CM0560564 Gray, non-sanding seal coat Gallon CM0560566 Off-white epoxy non-chromated Gallon sanding surfacer CM0120888 Hardener/adduct Gallon CM0702901 Thinner Gallon CM0110588 Thinner Gallon Slower dry time Blue epoxy surfacer. Designed to be used as a fill primer for composites and fiberglass surfaces. Overnight re-coating. Primer to hardener mix ratio: 1:1. Part No. Description Quantity Comments CM0482300 Blue epoxy surfacer Gallon CM0120900 Hardener/adduct Gallon CM0702901 Thinner Gallon Isopropyl alcohol, medium-fast CM0110588 Thinner Gallon Slower dry time High Solids Primers High solids corrosion primer. This chromated, low VOC, epoxy, non-sanding green primer is for use over wash primer or conversion-coated surfaces. Use on aluminum, steel and magnesium. Outstanding flexibility, performance, and resistance to corrosion and chemicals. Primer to hardener mix ratio: 4:1. Part No. Description Quantity Comments CM0483928 High solids corrosion primer Gallon CM0120828 Hardener/adduct Gallon CM0110944 Thinner Quart, gallon High solids corrosion primer. This high-performance, low VOC, two-component green, corrosion- inhibitive epoxy primer is intended for use on all types of aircraft. No additional thinning is required. Primer to hardener mix ratio: 2:1. Part No. Description Quantity Comments CM0483505 High solids corrosion primer Gallon No additional thinning required CM0120506 Hardener/adduct Gallon High solids sanding surfacer. This "express", three-part, low VOC gray urethene surfacer is for repairs. Can be re-coated in 20 minutes and sanded in an hour. Primer to hardener to activator mix ratio: 4:1: 1 /4. Part No. Description Quantity Comments CM0481810 High solids "express" sanding surfacer Gallon Repair CM0120432 Hardener/adduct Gallon CM0120433 Activator Pint High solids surfacer. Two-part, low white VOC fill/sanding primer to be used over corrosion primer. Light sand the same day or heavier sand with overnight cure. Primer to hardener mix ratio: 4:1. Part No. Description Quantity Comments CM0480920 High solids surfacer Gallon CM0120911 Hardener/adduct Quart, gallon CM0110944 Thinner Quart, gallon Note: For mixing instructions and ratios and other specification contact Aviall or Sherwin Williams or go to sherwin-williams.com

Previous Page
Next Page