Aviall Product Catalog And Source Book Page 2385 Tools & Test Equipment

PRESSURE TESTERS BARFIELD TEST EQUIPMENT aviall ability aviall.com 2385 Part No. PSI Accuracy 304-00003 0-60 psi Standard gauge accuracy 2 % of full scale 304-00004 0-200 psi 304-00005 0-600 psi 304-00006 0-200 psi Digital gauge 304-00007 0-500 psi Digital gauge 304-00100 0-60 psi Inspector gauge accuracy 1 /2 % of full scale 304-00101 0-100 psi 304-00102 0-160 psi 304-00109 0-200 psi 304-00103 0-300 psi 304-00104 0-600 psi Part No. Weight Height Width Depth 2311F 7.3 lbs. (3.3 kg) 6.6" (16.8 cm) 9.3" (23.6 cm) 8.3" (21.0 cm) (excluding gauge) 2311FA pressure tester. The 2311FA pressure tester field tests aircraft pressure systems for both reciprocating and turbine engine pressure systems. It provides pressure for testing pressure transmitters, warning switches pressure-type torque (BMEP) indicators and system leak testing in the range of 0-600 psi. The unit consists of a cylinder equipped with a manually operated screw piston for developing pressure. A fluid reservoir is connected through a control valve to the pressure cylinder. 1 /8 NPT female outlet port is provided for attachment to the unit or system to be tested. The tester is portable and rugged, with a wide range capability. It is simple to operate, self-contained and both line and shop proven. Two types of gauges are recommended and available depending upon the requirements of the user (standard or inspector test types). Standard gauges are available with an accuracy of 2% of full scale in ranges of 0-60, 0-200, and 0-600 pounds per square inch (psi). Inspector test gauges are available with an accuracy of 1 /2% of full scale in ranges of 0-60, 0-100, 0-160, 0-200, 0-300 and 0-600 psi. The use of VITON (fluro-carbon) seals on the piston permits the use of any fuel, lubricating or hydraulic fluid. The principal NON-COMPATIBLE fluids NOT to be used with VITON seals are: alcohols, aldehydes, amines, alkyl phosphate esters (Skydrol), ethers and ketones. Features: Field tests aircraft pressure systems in the 0-600 psi range Provides for both leak and calibration tests Pressure source for pressure transducers, warning switches and direct reading pressure gauges Applicable for shop or line use No electrical or pneumatic source needed Optional standard and inspector gauges available.

Previous Page
Next Page