Aviall Product Catalog And Source Book Page 2410 Tools & Test Equipment

CYLINDER BASE WRENCHES SPX KENT-MOORE WRENCHES aviall.com North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 2410 North America and AOG 1.800.AVIALL.1 International Sales 1.800.AVIALL.3 or +1 972.586.1985 Kent-Moore (formerly Borroughs) aircraft wrenches are machined from forged alloy steel, then heat-treated for maximum strength and toughness. Due to the necessary thin-wall configuration, it is extremely important that the user insure that the wrench shank is kept square to the nut to prevent off-center loads on the wrench and breakage. Cylinder base nut wrench. For 470 and 520 series engine mount area. The special configuration of these wrenches permits access to the engine mount areas as shown in photo. Part No. Size Length KM5203 3 /8" hex 17" KM5203A 9 /16" hex 17" KM5204 5 /8" hex 17" Note: The KM5203A wrench is specially designed for 520 D&H engines for No. 3 and No. 6 cylinders (next to engine mounts) Cylinder base nut wrench. For Lycoming 6494-2/6494-3. Heat-treated alloy steel for maximum toughness. Part No. Size KM6494-2 1 /2" hex KM6494-3 3 /8" hex Cylinder base nut wrench. For Bonanza aircraft. These wrenches are specially manufactured for the Bonanza, where space is limited. The overall wrench length is controlled to close tolerance to ensure easy access to bolts. Part No. Size Length KM3881 1 /4" hex 11 1 /2" KM3882-2 1 /2" hex 11 1 /2" KM3882A 9 /16" hex 11 1 /2" KM3882-3A 5 /8" hex 11 1 /2" KM38824 3 /4" hex 11 1 /2" Cylinder base nut wrench. Both series wrenches are made from alloy steel forgings, with 12-point hex wrench ends and standard 1 /2" square female drive end. The 3882 Pro-Line series wrenches have the wall thick- ness between the hex and wrench OD more closely controlled for maximum strength. The 3882 series wrenches are covered by Kent-Moore's lifetime warranty. The TP2882 series wrenches have a 90-day warranty. Standard Series Pro-Line Part No. Size TP2882 KM3882 9 /16" hex TP2882-1 KM3882-1 7 /16" hex TP2882-2 KM3882-2 1 /2" hex TP2882-3 KM3882-3 5 /8" hex TP2882-4 KM3882-4 3 /4" hex Cylinder base nut wrench. For Continental 550 engines. This wrench is specifically designed for easy access to nuts on the 550 series engines. Standard 1 /2" square drive. Rugged 4140 alloy steel, 13" long overall. Also used for GTS10520BA-7th order stud. Part No. Size KM8158A 9 /16" hex

Previous Page
Next Page